RDR Refuelers

RDR Refuelers are available in combinations of high and low speeds and in any combination of two products within the same cabinet.

MODEL
PRODUCT
HOSES
SELF-CONTAINED
or REMOTE
STANDARD MOTOR
PUMPING UNIT
MAX Flow Rate
HS1
1
1
Self - Contained
1 1/2 HP
2"
58 gpm (220 lpm)
HS1-D1
1
2
Self - Contained
1 1/2 HP
2"
58 gpm (220 lpm)
HS1-D2
2
2
Self - Contained
1 1/2 HP
2"
58 gpm (220 lpm)
LS1
1
1
Self - Contained
3/4 HP
1"
24 gpm (91 lpm)
LS1-D1
1
2
Self - Contained
3/4 HP
1"
24 gpm (91 lpm)
LS1-D2
2
2
Self - Contained
3/4 HP
1"
24 gpm (91 lpm)
HS1/LS1-D1
1
2
Self - Contained
3/4 HP
1"
24 gpm (91 lpm)
HS1/LS1-D2
2
2
Self - Contained
3/4 HP
1"
24 gpm (91 lpm)
HS2
1
1
Remote

The flow rate of the dispensers is dependent
upon the size of the submersible or
remote pump being used.

Maximum allowable flow rates for remote units are the same as the flow rates for self-contained units.

Flow pressure to both high and low speed remote models must not exceed 50 psi.
HS2-D1
1
2
Remote
HS2-D2
2
2
Remote
LS2
1
1
Remote
LS2-D1
1
2
Remote
LS2-D2
2
2
Remote
HS2/LS2-D1
1
2
Remote
HS2/LS2-D2
2
2
Remote
Flow rates are optimal for only one hose flowing during testing.
Actual rates will vary depending upon installation conditions and accessories

Options

 

  • The S2 cabinet accommodates a card reader and a receipt printer.
  • The X2 option allows the alternate use of a small or large hose on one or both sides of the refueler.

    • Satellites

    Satellite units provide remote dispensing of product while a single sale volume registers on a master pump or dispenser.

    RDR satellite units are available for both low and high speed units and have the same structure and appearance as RDR refuelers